Micro-Emulsion Cutting Fluid 	
			SPECIAL PROPERTIES AND APPLICATION 	
			   SW-380 is new generation product offering the advantages of both “Synthetic fluid” and Emulsion fluid”. It has excellent lubricity, anti-rust, cooling and EP properties. It has long service life 5 times as that of the emulsion oil because of its good bio-stability against rancidity. It is suitable for CNC machine center, multi-purpose combined tool machine and centralized cooling system.. 	
			1. Good stability 	
			2. Build in corrosion inhibitor Good anti-rust properties to provide the work piece protection 	
			3. Provides good EP and boundary lubrication effective against wear and seizure during machining, promote good surface finish and tool life. 	
			4. Good bio-stability against rancidity, provide long service life from 3 months to 1 year 	
			5. Low foam 	
			6. Replace machine oil & diesel oil and emulsion oil, environmentally friendly operations. 	
			TYPCAL TECHNICAL DATA 	
																					SW-380 					
				 															Index 					
				 															Test Method 					
				 			 																		Appearance 					
				 															Concentrate 					
				 															Brown transparent liquid 					
				 															— 					
				 			 																		4%Solution 					
				 															  					
											 Semi-transparent milky 					
				 															— 					
				 			 																		5% 					
											Dilute 					
				 															Emulsibility 					
				 															Separate out oil 					
				 															None 					
				 															SY1374 					
				 			 																		Soap formatiom 					
				 															None 					
				 			 																		Corrosion test  					
											35±2℃ 					
				 															Cast Iron    24h 					
				 															Pass 					
				 															GB/T6144 					
				 			 																		Copper      3h 					
				 															Pass 					
				 															GB/T6144 					
				 			 																		Aluminum   3h 					
				 															Pass 					
				 															GB/T6144 					
				 			 																		Rust test 					
											55±2℃ 					
				 															Cast Iron, Single plate  					
				 															24h   A 					
				 															GB/T6144 					
				 			 																		Cast Iron, Stack plate 					
				 															24h   A 					
				 															GB/T6144 					
				 			 																		PH value 					
				 															8~9 					
				 															PH test paper 					
				 			 			
			USAGE                                 	
			1. Clean up the system before use              	
			2.Dilute by water from 1:15 to 1:30. 	
			3.The water hardness should be less than 400ppm 	
			4.Supplement timely while using 	
			PACKAGE     200L or 18L steel barrel    	
SW-380
Index
Test Method
Appearance
Concentrate
Brown transparent liquid
—
4%Solution
Semi-transparent milky
—
5%
Dilute
Emulsibility
Separate out oil
None
SY1374
Soap formatiom
None
Corrosion test
35±2℃
Cast Iron 24h
Pass
GB/T6144
Copper 3h
Pass
GB/T6144
Aluminum 3h
Pass
GB/T6144
Rust test
55±2℃
Cast Iron, Single plate
24h A
GB/T6144
Cast Iron, Stack plate
24h A
GB/T6144
PH value
8~9
PH test paper
	


 




